Set Up Instructions
Follow these step-by-step instructions to set up your OpCam and start capturing high-quality surgical footage. This guide will walk you through the process, ensuring a smooth and efficient setup, however should you require any further set up help, please contact us at OpCamPro@gmail.com
IN THE OPCAM PRO CASE
The case includes everything needed to get started, and comes readily set up to capture high resolution surgery footage. The basic kit case includes:
-
Opcam Pro Camera
-
USB Power Unit Plug
-
Operative Theatre Light Handle Clamp
-
5m HDMI/USB Cable
STEP 1: DOWNLOAD THE GOPRO QUIK APP & CONNECT IT TO THE GOPRO
On the camera: Swipe down (from top to bottom) on the Touch Display
-
Select “Connections”
-
Select “Connect New Device”
-
Open GoPro App on your mobile phone
-
Tap camera icon at top left of screen
-
Tap “+ Add Device” at bottom of screen
-
Select your camera model and follow prompts
STEP 2: CONNECT THE CLAMP TO THE THEATRE LIGHT HANDLE
Ensure the clamp is tightened securely. If the handle is too wide for the handlebar clamp, remove the inner rubber. The clamp has two arms that can be tightened with the screw. The metal screw closest the gopro controls the ball joint which can rotate the gopro 180 degrees.
STEP 3: CONNECT THE USB-C AND HDMI CABLE
Attach the cables to the rear of the GoPro, using the velcro attachments to secure the cabling up the length of theatre light to the base. Ensure there is some slack to allow manoeuvrability of the theatre light head.
STEP 4: CONNECT THE USB-C AND HDMI CABLE TO MONITOR
Attach the HDMI cable to a monitor, and the USB power cable to the included pass through power bank.
STEP 5: ADJUST THE FOCUS AND FOCAL RANGE
The ring closest the camera body adjusts the focus, the middle ring controls the aperture (keep locked), and the front ring adjusts the focal range. Please note that each time you change the focal range, you will need to refocus.